CombinedBinHAndClucV8XH

import freqtrade.vendor.qtpylib.indicators as qtpylib
import numpy as np
import talib.abstract as ta
from freqtrade.strategy import merge_informative_pair
from freqtrade.strategy import DecimalParameter, IntParameter
from freqtrade.strategy.interface import IStrategy
from freqtrade.persistence import Trade
from pandas import DataFrame
from datetime import datetime, timedelta
from functools import reduce
###########################################################################################################
##                Based on CombinedBinHAndClucV8 by iterativ
##                (Few improvements on this version by themoz)                                           ##
##                                                                                                       ##
##    Freqtrade https://github.com/freqtrade/freqtrade                                                   ##
##    The authors of the original CombinedBinHAndCluc https://github.com/freqtrade/freqtrade-strategies  ##
##    V8 by iterativ.                                                                                    ##
##                                                                                                       ##
###########################################################################################################
##               GENERAL RECOMMENDATIONS                                                                 ##
##                                                                                                       ##
##   For optimal performance, suggested to use between 4 and 6 open trades, with unlimited stake.        ##
##   A pairlist with 20 to 60 pairs. Volume pairlist works well.                                         ##
##   Prefer stable coin (USDT, BUSDT etc) pairs, instead of BTC or ETH pairs.                            ##
##   Highly recommended to blacklist leveraged tokens (*BULL, *BEAR, *UP, *DOWN etc).                    ##
##   Ensure that you don't override any variables in you config.json. Especially                         ##
##   the timeframe (must be 5m) & exit_profit_only (must be true).                                       ##
##                                                                                                       ##
###########################################################################################################
##               DONATIONS                                                                               ##
##                                                                                                       ##
##   Absolutely not required. However, will be accepted as a token of appreciation.                      ##
##                                                                                                       ##
##   BTC: bc1qvflsvddkmxh7eqhc4jyu5z5k6xcw3ay8jl49sk                                                     ##
##   ETH: 0x83D3cFb8001BDC5d2211cBeBB8cB3461E5f7Ec91                                                     ##
##                                                                                                       ##
###########################################################################################################
# SSL Channels

def SSLChannels(dataframe, length=7):
    df = dataframe.copy()
    df['ATR'] = ta.ATR(df, timeperiod=14)
    df['smaHigh'] = df['high'].rolling(length).mean() + df['ATR']
    df['smaLow'] = df['low'].rolling(length).mean() - df['ATR']
    df['hlv'] = np.where(df['close'] > df['smaHigh'], 1, np.where(df['close'] < df['smaLow'], -1, np.NAN))
    df['hlv'] = df['hlv'].ffill()
    df['sslDown'] = np.where(df['hlv'] < 0, df['smaHigh'], df['smaLow'])
    df['sslUp'] = np.where(df['hlv'] < 0, df['smaLow'], df['smaHigh'])
    return (df['sslDown'], df['sslUp'])

class CombinedBinHAndClucV8XH(IStrategy):
    INTERFACE_VERSION = 3
    # Buy hyperspace params:
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    entry_params = {'entry_bb20_close_bblowerband': 0.917, 'entry_bb20_volume': 32, 'entry_bb40_bbdelta_close': 0.039, 'entry_bb40_closedelta_close': 0.02, 'entry_bb40_tail_bbdelta': 0.239, 'entry_mfi': 37.77, 'entry_min_inc': 0.01, 'entry_rsi': 35.74, 'entry_rsi_1h': 66.97, 'entry_rsi_diff': 49.29, 'entry_dip_threshold_0': 0.015, 'entry_dip_threshold_1': 0.12, 'entry_dip_threshold_2': 0.28, 'entry_dip_threshold_3': 0.36, 'entry_ema_open_mult_1': 0.02, 'entry_volume_1': 2.0}
    # Sell hyperspace params:
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    # value loaded from strategy
    exit_params = {'exit_rsi_main': 72.19, 'exit_rsi_parachute': 39.84, 'exit_custom_roi_profit_1': 0.01, 'exit_custom_roi_profit_2': 0.04, 'exit_custom_roi_profit_3': 0.08, 'exit_custom_roi_profit_4': 0.14, 'exit_custom_roi_profit_5': 0.04, 'exit_custom_roi_rsi_1': 50, 'exit_custom_roi_rsi_2': 50, 'exit_custom_roi_rsi_3': 56, 'exit_custom_roi_rsi_4': 58, 'exit_custom_stoploss_1': -0.05, 'exit_trail_down_1': 0.03, 'exit_trail_down_2': 0.015, 'exit_trail_profit_max_1': 0.4, 'exit_trail_profit_max_2': 0.1, 'exit_trail_profit_min_1': 0.1, 'exit_trail_profit_min_2': 0.02}
    minimal_roi = {'0': 10}
    stoploss = -0.99  # effectively disabled.
    timeframe = '5m'
    inf_1h = '1h'  # informative tf
    # Sell signal
    use_exit_signal = True
    exit_profit_only = True
    # it doesn't meant anything, just to guarantee there is a minimal profit.
    exit_profit_offset = 0.001
    ignore_roi_if_entry_signal = True
    # Trailing stoploss
    trailing_stop = False
    trailing_only_offset_is_reached = True
    trailing_stop_positive = 0.01
    trailing_stop_positive_offset = 0.03
    # Custom stoploss
    use_custom_stoploss = True
    # Run "populate_indicators()" only for new candle.
    process_only_new_candles = True
    # Number of candles the strategy requires before producing valid signals
    startup_candle_count: int = 200
    # Optional order type mapping.
    order_types = {'entry': 'limit', 'exit': 'limit', 'stoploss': 'market', 'stoploss_on_exchange': False}
    # Buy Hyperopt params
    entry_dip_threshold_0 = DecimalParameter(0.001, 0.1, default=0.015, space='entry', decimals=3, optimize=False, load=True)
    entry_dip_threshold_1 = DecimalParameter(0.08, 0.2, default=0.12, space='entry', decimals=2, optimize=False, load=True)
    entry_dip_threshold_2 = DecimalParameter(0.02, 0.4, default=0.28, space='entry', decimals=2, optimize=False, load=True)
    entry_dip_threshold_3 = DecimalParameter(0.25, 0.44, default=0.36, space='entry', decimals=2, optimize=False, load=True)
    entry_bb40_bbdelta_close = DecimalParameter(0.005, 0.04, default=0.031, space='entry', optimize=True, load=True)
    entry_bb40_closedelta_close = DecimalParameter(0.01, 0.03, default=0.021, space='entry', optimize=True, load=True)
    entry_bb40_tail_bbdelta = DecimalParameter(0.2, 0.4, default=0.264, space='entry', optimize=True, load=True)
    entry_bb20_close_bblowerband = DecimalParameter(0.8, 1.1, default=0.992, space='entry', optimize=True, load=True)
    entry_bb20_volume = IntParameter(18, 36, default=29, space='entry', optimize=True, load=True)
    entry_rsi_diff = DecimalParameter(34.0, 60.0, default=50.48, space='entry', decimals=2, optimize=True, load=True)
    entry_min_inc = DecimalParameter(0.005, 0.05, default=0.01, space='entry', decimals=2, optimize=True, load=True)
    entry_rsi_1h = DecimalParameter(40.0, 70.0, default=67.0, space='entry', decimals=2, optimize=True, load=True)
    entry_rsi = DecimalParameter(30.0, 40.0, default=38.5, space='entry', decimals=2, optimize=True, load=True)
    entry_mfi = DecimalParameter(36.0, 65.0, default=36.0, space='entry', decimals=2, optimize=True, load=True)
    entry_volume_1 = DecimalParameter(1.0, 10.0, default=2.0, space='entry', decimals=2, optimize=False, load=True)
    entry_ema_open_mult_1 = DecimalParameter(0.01, 0.05, default=0.02, space='entry', decimals=3, optimize=False, load=True)
    # Sell Hyperopt params
    exit_custom_roi_profit_1 = DecimalParameter(0.01, 0.03, default=0.01, space='exit', decimals=2, optimize=False, load=True)
    exit_custom_roi_rsi_1 = DecimalParameter(40.0, 56.0, default=50, space='exit', decimals=2, optimize=False, load=True)
    exit_custom_roi_profit_2 = DecimalParameter(0.01, 0.2, default=0.04, space='exit', decimals=2, optimize=False, load=True)
    exit_custom_roi_rsi_2 = DecimalParameter(42.0, 56.0, default=50, space='exit', decimals=2, optimize=False, load=True)
    exit_custom_roi_profit_3 = DecimalParameter(0.15, 0.3, default=0.08, space='exit', decimals=2, optimize=False, load=True)
    exit_custom_roi_rsi_3 = DecimalParameter(44.0, 58.0, default=56, space='exit', decimals=2, optimize=False, load=True)
    exit_custom_roi_profit_4 = DecimalParameter(0.3, 0.7, default=0.14, space='exit', decimals=2, optimize=False, load=True)
    exit_custom_roi_rsi_4 = DecimalParameter(44.0, 60.0, default=58, space='exit', decimals=2, optimize=False, load=True)
    exit_custom_roi_profit_5 = DecimalParameter(0.01, 0.1, default=0.04, space='exit', decimals=2, optimize=False, load=True)
    exit_trail_profit_min_1 = DecimalParameter(0.1, 0.25, default=0.1, space='exit', decimals=3, optimize=False, load=True)
    exit_trail_profit_max_1 = DecimalParameter(0.3, 0.5, default=0.4, space='exit', decimals=2, optimize=False, load=True)
    exit_trail_down_1 = DecimalParameter(0.04, 0.1, default=0.03, space='exit', decimals=3, optimize=False, load=True)
    exit_trail_profit_min_2 = DecimalParameter(0.01, 0.1, default=0.02, space='exit', decimals=3, optimize=False, load=True)
    exit_trail_profit_max_2 = DecimalParameter(0.08, 0.25, default=0.1, space='exit', decimals=2, optimize=False, load=True)
    exit_trail_down_2 = DecimalParameter(0.04, 0.2, default=0.015, space='exit', decimals=3, optimize=False, load=True)
    exit_custom_stoploss_1 = DecimalParameter(-0.15, -0.03, default=-0.05, space='exit', decimals=2, optimize=False, load=True)
    exit_rsi_main = DecimalParameter(72.0, 90.0, default=80, space='exit', decimals=2, optimize=True, load=True)
    #X version additional RSI value
    exit_rsi_parachute = DecimalParameter(30.0, 55.0, default=40, space='exit', decimals=2, optimize=True, load=True)

    def custom_stoploss(self, pair: str, trade: 'Trade', current_time: datetime, current_rate: float, current_profit: float, **kwargs) -> float:
        dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)
        last_candle = dataframe.iloc[-1].squeeze()
        # Manage losing trades and open room for better ones.
        if (current_profit < 0) & (current_time - timedelta(minutes=280) > trade.open_date_utc):
            return 0.01
        elif current_profit < self.exit_custom_stoploss_1.value:
            if last_candle is not None:
                if last_candle['sma_200_dec'] & last_candle['sma_200_dec_1h']:
                    return 0.01
        # X version:
        # try eventually to catch a minimal pullback before it is too late
        elif 0 >= current_profit >= self.exit_custom_stoploss_1.value:
            if last_candle is not None:
                if last_candle['sma_200_dec'] & (last_candle['close'] > last_candle['bb_middleband']) & (last_candle['rsi'] > self.exit_rsi_parachute.value):
                    return 0.01
        return 0.99

    def custom_exit(self, pair: str, trade: 'Trade', current_time: 'datetime', current_rate: float, current_profit: float, **kwargs):
        dataframe, _ = self.dp.get_analyzed_dataframe(pair, self.timeframe)
        last_candle = dataframe.iloc[-1].squeeze()
        if last_candle is not None:
            if (current_profit > self.exit_custom_roi_profit_4.value) & (last_candle['rsi'] < self.exit_custom_roi_rsi_4.value):
                return 'roi_target_4'
            elif (current_profit > self.exit_custom_roi_profit_3.value) & (last_candle['rsi'] < self.exit_custom_roi_rsi_3.value):
                return 'roi_target_3'
            elif (current_profit > self.exit_custom_roi_profit_2.value) & (last_candle['rsi'] < self.exit_custom_roi_rsi_2.value):
                return 'roi_target_2'
            elif (current_profit > self.exit_custom_roi_profit_1.value) & (last_candle['rsi'] < self.exit_custom_roi_rsi_1.value):
                return 'roi_target_1'
            elif (current_profit > 0) & (current_profit < self.exit_custom_roi_profit_5.value) & last_candle['sma_200_dec']:
                return 'roi_target_5'
            elif (current_profit > self.exit_trail_profit_min_1.value) & (current_profit < self.exit_trail_profit_max_1.value) & ((trade.max_rate - trade.open_rate) / 100 > current_profit + self.exit_trail_down_1.value):
                return 'trail_target_1'
            elif (current_profit > self.exit_trail_profit_min_2.value) & (current_profit < self.exit_trail_profit_max_2.value) & ((trade.max_rate - trade.open_rate) / 100 > current_profit + self.exit_trail_down_2.value):
                return 'trail_target_2'
        return None

    def informative_pairs(self):
        pairs = self.dp.current_whitelist()
        informative_pairs = [(pair, self.inf_1h) for pair in pairs]
        return informative_pairs

    def informative_1h_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:
        assert self.dp, 'DataProvider is required for multiple timeframes.'
        # Get the informative pair
        informative_1h = self.dp.get_pair_dataframe(pair=metadata['pair'], timeframe=self.inf_1h)
        # EMA
        informative_1h['ema_50'] = ta.EMA(informative_1h, timeperiod=50)
        informative_1h['ema_100'] = ta.EMA(informative_1h, timeperiod=100)
        informative_1h['ema_200'] = ta.EMA(informative_1h, timeperiod=200)
        # SMA
        informative_1h['sma_200'] = ta.SMA(informative_1h, timeperiod=200)
        informative_1h['sma_200_dec'] = informative_1h['sma_200'] < informative_1h['sma_200'].shift(20)
        # RSI
        informative_1h['rsi'] = ta.RSI(informative_1h, timeperiod=14)
        # SSL Channels
        ssl_down_1h, ssl_up_1h = SSLChannels(informative_1h, 20)
        informative_1h['ssl_down'] = ssl_down_1h
        informative_1h['ssl_up'] = ssl_up_1h
        return informative_1h

    def normal_tf_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:
        bb_40 = qtpylib.bollinger_bands(dataframe['close'], window=40, stds=2)
        dataframe['lower'] = bb_40['lower']
        dataframe['mid'] = bb_40['mid']
        dataframe['bbdelta'] = (bb_40['mid'] - dataframe['lower']).abs()
        dataframe['closedelta'] = (dataframe['close'] - dataframe['close'].shift()).abs()
        dataframe['tail'] = (dataframe['close'] - dataframe['low']).abs()
        bollinger = qtpylib.bollinger_bands(qtpylib.typical_price(dataframe), window=20, stds=2)
        dataframe['bb_lowerband'] = bollinger['lower']
        dataframe['bb_middleband'] = bollinger['mid']
        dataframe['bb_upperband'] = bollinger['upper']
        dataframe['ema_slow'] = ta.EMA(dataframe, timeperiod=50)
        dataframe['volume_mean_slow'] = dataframe['volume'].rolling(window=30).mean()
        # EMA
        dataframe['ema_12'] = ta.EMA(dataframe, timeperiod=12)
        dataframe['ema_26'] = ta.EMA(dataframe, timeperiod=26)
        dataframe['ema_50'] = ta.EMA(dataframe, timeperiod=50)
        dataframe['ema_200'] = ta.EMA(dataframe, timeperiod=200)
        # SMA
        dataframe['sma_5'] = ta.SMA(dataframe, timeperiod=5)
        dataframe['sma_200'] = ta.SMA(dataframe, timeperiod=200)
        dataframe['sma_200_dec'] = dataframe['sma_200'] < dataframe['sma_200'].shift(20)
        # MFI
        dataframe['mfi'] = ta.MFI(dataframe, timeperiod=14)
        # RSI
        dataframe['rsi'] = ta.RSI(dataframe, timeperiod=14)
        return dataframe

    def populate_indicators(self, dataframe: DataFrame, metadata: dict) -> DataFrame:
        # The indicators for the 1h informative timeframe
        informative_1h = self.informative_1h_indicators(dataframe, metadata)
        dataframe = merge_informative_pair(dataframe, informative_1h, self.timeframe, self.inf_1h, ffill=True)
        # The indicators for the normal (5m) timeframe
        dataframe = self.normal_tf_indicators(dataframe, metadata)
        return dataframe

    def populate_entry_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:
        conditions = []
        conditions.append((dataframe['close'] > dataframe['ema_200_1h']) & (dataframe['ema_50'] > dataframe['ema_200']) & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & ((dataframe['open'].rolling(2).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_1.value) & ((dataframe['open'].rolling(12).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_2.value) & dataframe['lower'].shift().gt(0) & dataframe['bbdelta'].gt(dataframe['close'] * self.entry_bb40_bbdelta_close.value) & dataframe['closedelta'].gt(dataframe['close'] * self.entry_bb40_closedelta_close.value) & dataframe['tail'].lt(dataframe['bbdelta'] * self.entry_bb40_tail_bbdelta.value) & dataframe['close'].lt(dataframe['lower'].shift()) & dataframe['close'].le(dataframe['close'].shift()) & (dataframe['volume'] > 0))
        conditions.append((dataframe['close'] > dataframe['ema_200']) & (dataframe['close'] > dataframe['ema_200_1h']) & (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & ((dataframe['open'].rolling(2).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_1.value) & ((dataframe['open'].rolling(12).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_2.value) & (dataframe['close'] < dataframe['ema_slow']) & (dataframe['close'] < self.entry_bb20_close_bblowerband.value * dataframe['bb_lowerband']) & (dataframe['volume'] < dataframe['volume_mean_slow'].shift(1) * self.entry_bb20_volume.value))
        conditions.append((dataframe['close'] < dataframe['sma_5']) & (dataframe['ssl_up_1h'] > dataframe['ssl_down_1h']) & (dataframe['ema_50'] > dataframe['ema_200']) & (dataframe['ema_50_1h'] > dataframe['ema_200_1h']) & ((dataframe['open'].rolling(2).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_1.value) & ((dataframe['open'].rolling(12).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_2.value) & ((dataframe['open'].rolling(144).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_3.value) & (dataframe['rsi'] < dataframe['rsi_1h'] - self.entry_rsi_diff.value) & (dataframe['volume'] > 0))
        conditions.append((dataframe['sma_200'] > dataframe['sma_200'].shift(20)) & (dataframe['sma_200_1h'] > dataframe['sma_200_1h'].shift(16)) & ((dataframe['open'].rolling(2).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_1.value) & ((dataframe['open'].rolling(12).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_2.value) & ((dataframe['open'].rolling(144).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_3.value) & ((dataframe['open'].rolling(24).min() - dataframe['close']) / dataframe['close'] > self.entry_min_inc.value) & (dataframe['rsi_1h'] > self.entry_rsi_1h.value) & (dataframe['rsi'] < self.entry_rsi.value) & (dataframe['mfi'] < self.entry_mfi.value) & (dataframe['volume'] > 0))
        conditions.append((dataframe['close'] > dataframe['ema_100_1h']) & (dataframe['ema_50_1h'] > dataframe['ema_100_1h']) & ((dataframe['open'].rolling(2).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_1.value) & ((dataframe['open'].rolling(12).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_2.value) & ((dataframe['open'].rolling(144).max() - dataframe['close']) / dataframe['close'] < self.entry_dip_threshold_3.value) & (dataframe['volume'].rolling(4).mean() * self.entry_volume_1.value > dataframe['volume']) & (dataframe['ema_26'] > dataframe['ema_12']) & (dataframe['ema_26'] - dataframe['ema_12'] > dataframe['open'] * self.entry_ema_open_mult_1.value) & (dataframe['ema_26'].shift() - dataframe['ema_12'].shift() > dataframe['open'] / 100) & (dataframe['close'] < dataframe['bb_lowerband']) & (dataframe['volume'] > 0))
        if conditions:
            dataframe.loc[reduce(lambda x, y: x | y, conditions), 'enter_long'] = 1
        return dataframe

    def populate_exit_trend(self, dataframe: DataFrame, metadata: dict) -> DataFrame:
        conditions = []
        conditions.append((dataframe['close'] > dataframe['bb_upperband']) & (dataframe['close'].shift(1) > dataframe['bb_upperband'].shift(1)) & (dataframe['close'].shift(2) > dataframe['bb_upperband'].shift(2)) & (dataframe['close'].shift(3) > dataframe['bb_upperband'].shift(3)) & (dataframe['volume'] > 0))
        conditions.append((dataframe['rsi'] > self.exit_rsi_main.value) & (dataframe['volume'] > 0))
        if conditions:
            dataframe.loc[reduce(lambda x, y: x | y, conditions), 'exit_long'] = 1
        return dataframe